Equipment Review: MagPul PMAG 10 GL9-G19 Magazines

Earlier this year in January, I was excited to see MagPul bring a restricted capacity Glock magazine to market for those of us that live behind enemy lines. I immediately ordered three of the MagPul PMAG 10 GL9-G19 magazines. Over the past six months, I have put well over a case worth’s of ammunition from various manufacturers through my Glocks using the magazines in classes, in a recent competition, and during weekly range visits. While I haven’t abused them, I have definitely run them hard. They have never failed to drop free, and I’ve repeatedly dropped them onto the gravel at the ranges I use. In fact, I have yet to experience even so much as a hiccup from the magazines. Based on my experience so far, I am seriously considering switching to them for carry (duty) purposes.

I like these magazines for a number of reasons.

  • Third, the magazines rely on an internal insert that blocks travel of the follower inside the double stack magazine body. This is in contrast to other designs that rely on internal constriction of the magazine body width to limit capacity in what ostensibly should be a staggered round design. I’m not an engineer, but I suspect this is the reason why they are seemingly more reliable than other designs.
  • Fourth, once you learn the proper way to do it, they are easy to disassemble for cleaning. (I did indeed need to use a vice as demonstrated in the video to successfully disassemble mine. I think it’s almost required, unless you happen to have three hands!) I don’t religiously clean my magazines, but it’s nice to be able to do so easily if needed.

img_0724

I do have a couple of minor issues with the magazines. Nothing is perfect. I have found that it is very difficult to load 10 rounds into the magazines without using a loading device to press down on the rounds. I just use the Glock version that ships with the pistols. (Some high volume users have reported that the magazine springs relax somewhat with use… mine haven’t yet.) Conversely, I can easily load an OEM magazine fully without any mechanical adjuncts. Also, OEM magazines have witness holes for almost every round. The MagPul magazines only have one witness hole that simply shows when the magazine is full. A couple more witness holes would enhance the design in my opinion.

img_0720

Those minor complaints aside, I think MagPul has again answered a distinct need in the marketplace with a well designed product. The MagPul 10 round magazines are everything that I hoped they would be, and stand head and shoulders above other aftermarket restricted capacity magazines that I’ve tried. If you live in a state with draconian magazine capacity laws, these magazines are a good option.


I also want to briefly comment on the regular capacity MagPul Glock magazines. I used three such brand new magazines recently in an out of state class, and while overall I was pleased with them, I did have one particular magazine that caused me repeated malfunctions when the follower hung up inside the magazine body on the first day of class. I disassembled the magazine that night and wiped it out, and didn’t have any further issues on the second day of class. I don’t know whether dust and debris from the range caused the follower to bind up or whether there may have been an internal burr that caused the problem, but nonetheless, it happened. Fortunately, I’ve experienced no such issues with the limited capacity magazines that I have. I bring this up to highlight the fact that problems can occur even with the best gear, and that it’s wise to vet your gear in training before relying on it for real. Mark and keep track of your mags, and if one is causing repeated problems, relegate it to training or toss it in the trash.


Thanks for reading, and if you’re not already, follow us here at the blog or on our social media. As always, we welcome questions and comments.

Advertisements

7 thoughts on “Equipment Review: MagPul PMAG 10 GL9-G19 Magazines

  1. I have used the standard capacity G17 and 19 AND the 12 rounder for the G26. The G26 mags are my preferred mag. Zero problems and perfect concealment size. Better than the Pearce + floorplates.

    Like

    1. I wish I could legally buy some of the 12 rounders for my G26, but alas, they are not legal in my jurisdiction. I’ve read several horror stories about the 15 and 17 round capacity mags, but so far, the smaller capacity ones seem to be doing well. I suspect the initial offering may have had some teething issues that have since been mostly worked out. MagPul has publicly acknowledged one such issue that they quickly rectified, if memory serves.

      Thanks for your comments and data points!

      Like

  2. In a totally different direction, I never thought of numbering my magazines that way, using instead, braille like dots (one dot, two dots, etc). Thanks for the great idea.

    Curious why you would use 10 rounders? Aren’t you in a free state?

    Like

    1. Matt, I’m not sure where I first saw using the dots that way, but I can’t claim the idea. And unfortunately, I live behind enemy lines in a state with magazine capacity laws on the books. At least I can carry, even if my magazine capacity is limited.

      Thanks for your comment!

      Like

  3. Who did the shaping/stippling on your G19?

    I checked your previous posts but the article that mentions grip changes shows pictures of a different G19.

    The stippling looks okay but the grip shaping is fantastic. I’ve been looking for someone to shape my gen4 grips exactly like that.

    Like

    1. The gun in the photos is a Boresight Solutions Duty package done on my old Gen3 G19 frame. I opted for a level 2 grip reduction. I’ll write more about it soon, but so far, it’s been well worth the price of admission.

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s